EWG 127410 WEN Washing Machine User Manual
ProgrammeTemperature rangeMaximumloadReducedload1)Maximumspin speedProgramme description(Type of load and soil level)Seta30°C - (Cold)1 kg700 rpmSpe
Programme + Prelavaggio + Prelavaggio 1)
Programmes Load(kg)Energyconsump‐tion (kWh)Water con‐sumption(litre)Approxi‐mate pro‐grammeduration(minutes)Remainingmoisture(%)1)Lana 30 °C 2)2 0.25
7.4 Stiro Facile The appliance carefully washes andspins the laundry to prevent the creases.The appliance decreases the spin speed,uses more water and
To deactivate/activate the acousticsignals, press button and button at the same time for about 6 seconds.If you deactivate theacoustic signals, they
Always obey the instructionsthat you find on thepackaging of the detergentproducts.Detergent compartment for pre‐wash phase.Detergent compartment forw
The PartenzaRitardata can not beselected with thedraining programme.10.7 Starting a programmewithout the delay startPress the Avvio/Pausa button.• The
The washing programme iscompleted, but there is water in thedrum:• The drum turns regularly to preventthe creases in the laundry.• The door lock indic
• To help the environment, do not usemore than the correct quantity ofdetergent.• Obey the instructions that you find onthe on packaging of these prod
12.5 Cleaning the detergent dispenser1.MAX122.MAX3. 4.MAX12.6 Cleaning the drain filterThe pump should be inspected regularlyand particularly if:• The
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
A B3. Place a container close to the pump tocollect any spillage.A = Cover filter.B = Emergency emptying hose.4. Release the emergency emptying hose,p
128. Put the cap back on the emergencyemptying hose and place the latter back in itsseat. Replace the filter into the pump byinserting it correctly in
WARNING!Make sure that thetemperature is more than 0°C before you use theappliance again.The manufacturer is notresponsible for damagescaused by low t
Problem Possible cause/solutionThe appliance does notfill with water properly.Make sure that the water tap is open.Make sure that the pressure of the
Problem Possible cause/solutionYou cannot open theappliance door.Make sure that the washing programme is finished.Set the drain or the spin programme
Remove the cardboard top. Remove thepolystyrene packaging materials.Remove the internal film.Open the door. Remove the polystyrenepiece from the door
12Remove the polystyrene protection from thebottom. Pull up the appliance in verticalposition.Remove the polystyrene block fitted on thedoor seal (if
Put the plastic caps in the holes. You can findthese caps in the user manual bag.We recommend that you keep the packaging and the transit bolts for an
14.3 The inlet hose20O20O45O45O• Connect the hose to the back appliance.Turn the inlet hose only left or right.• Loose the ring nut to set it in the c
• Making an U form with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide t
1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible i
To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to
16-22 mm22±1,5 mm416mmX595-598 mmØ 35 mm14 mmDoorThe dimensions of the door should be:• width 595 - 598 mm• thickness 16-22 mm• the height X depends o
ABCEDWARNING!Do not remove the screw B.If the door has to be opened from left to right,invert the position of the plates E, the magnet D and the plate
ENGLISH 33
www.electrolux.com34
ENGLISH 35
www.electrolux.com/shop132903270-A-422014
• The appliance is to be connected to the water mainsusing the new supplied hose-sets. Old hose sets mustnot be reused.• If the supply cord is damaged
2.3 Water connection• Make sure not to cause damage tothe water hoses.• Before you connect the appliance tonew pipes or pipes not used for a longtime,
3.2 How to activate the childsafety deviceThis device prevents children or pets tobe closed in the drum.Turn the device clockwise, until thegroove is
4.2 DisplayA B CDEThe display shows the following information:A Soil degree indicators:IntensiveNormalDailyLightQuickQuickRefreshSuper RefreshWhen you
C Digitarea:• Duration of the selected programmeAfter you select a programme, the duration is displayed in hours andminutes (e. g. ). The duration is
5. PROGRAMMES5.1 Programme ChartProgrammeTemperature rangeMaximumloadReducedload1)Maximumspin speedProgramme description(Type of load and soil level)W
Kommentare zu diesen Handbüchern