Electrolux ESL5310LO Bedienungsanleitung PDF herunterladen (Seite 9)

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l Clarke de‐

grees

Water softener

level

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

If you use multi-tablets containing salt

and the hardness of your water is lower

than 21°dH, you can set the lowest water

softener level. It deactivates the salt refill

indicator.

If you use standard detergent or multi-

tablets without salt, set the proper

water hardness level to keep the salt

refill indicator active.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and

until the indicators ,

and start to flash

and the display is blank.

2. Press .

• The indicators

and

go off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g. = level 5.

3. Press again and again to change

the setting.

4. Press the on/off button to confirm the

setting.

6.3 The rinse aid empty

notification

When rinse aid chamber is empty, the

rinse aid indicator is turned on notifying

to refill rinse aid. If you are using multi-

tabs containing rinse aid and you are

satisfied with the drying result, you can

deactivate the notification for refilling

rinse aid. However, we recommend that

you always use rinse aid for best drying

performance.

If you use standard detergent or multi-

tablets without rinse aid, activate the

notification to keep the rinse aid refill

indicator active.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare