Electrolux EGG9363NOX Bedienungsanleitung PDF herunterladen (Seite 14)

The manufacturer refuses

to be held responsible, if

these safety measures are

not abided by.

Supply connections

This hob has to be connected to 230 —

240 V ( 50 Hz) electricity supply.

The hob has a terminal block which is

marked as follows:

• L — Live terminal

• N — Neutral terminal

• or E — Earth terminal

Before carrying out the connection, make

sure:

1. The limiter valve and the electrical

system can take the appliance load

(see the rating plate)

2. The supply system is equipped with

an efficient earth connection in

compliance with the current standards

and regulations

3. The outlet or omnipolar switch used

for connection is easily accessible with

the appliance installed.

The appliance is supplied with a 3 core

flexible power cable with a 3 amp plug. If it

is necessary to change the fuse, use a 3

amp ASTA-approved (BS 1362) fuse.

A B

C

D

E

A) Green and Yellow

B) 3 amp fuse

C) Brown

D) Cord clamp

E) Blue

The wires in the cord are coloured as

follows:

Green and yellow

- Earth

Blue - Neutral

Brown - Live

WARNING!

A cut off plug inserted into a

13 amp socket is a serious

shock hazard. Ensure that

the cut off plug is disposed of

safely.

8.7 Replacement of the

connection cable

The replacement of electric

cable must be carried out

exclusively by the service

force centre or by personnel

with similar competencies, in

accordance with the current

regulations.

To replace the connection

cable use only H05V2V2-F

T90 or equivalent type. Make

sure that the cable section is

applicable to the voltage load

and the working temperature.

The yellow/green earth wire

(B) must be approximately 2

cm longer than the live and

neutral wire (A).

A B

1. Connect the green and yellow (earth)

wire to the terminal which is marked

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare