Electrolux EHS60200P Bedienungsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus, we
recommend that you cook at the lowest
temperatures and do not brown food too
much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appli-
ance with steam blasters or high-pres-
sure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the ap-
pliance operates.
Removing the dirt:
1.
Remove immediately: melting plas-
tic, plastic foil, and food containing
sugar. Use a special glass ceramic
scraper. Put the scraper on the glass
ceramic surface at an acute angle and
slide the blade on the surface.
Stop the appliance and let it cool
down before you clean: limescale
rings, water rings, fat stains, shiny met-
allic discolorations. Use a special
cleaner for glass ceramic or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
What to do if…
Problem Possible cause and remedy
You cannot start the appliance or
operate it.
You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
There is water or fat stains on the control panel. Clean the control
panel
The key lock or child safety device operates
. Stop the func-
tion. See the section "Locking/unlocking the control panel" and
“Child safety device”.
The STOP+GO function operates
. Stop the function. See
the section "Starting the STOP+GO".
Start the appliance again and set the heat setting within 10 sec-
onds.
The residual heat indicator does
not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
The automatic heat up function
does not start.
There is still residual heat on the cooking zone
. Let the
cooking zone cool down
The highest heat setting is set. The highest heat setting has the
same power as the automatic heat up function.
You set the heat setting with
sensor field. Start from and
use
only.
You cannot switch on the outer
rings.
Switch on the inner ring first.
electrolux 9
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare