Electrolux ZA1 Bedienungsanleitung PDF herunterladen (Seite 13)

English 11

Timer Changing the

Message Display

Language

Error Messages

Normal. Timer: Auto

Select timer?

English

Select language?

Error: 7

Check

the bumper

See manual

Timer

It is possible to set the time duration for

Normal or Quick vacuuming.

1. Select the desired vacuuming program, or

press twice till “Select timer?” is

shown. Confirm by pressing .

2. Set the desired time setting by pressing

and then confirm by pressing .

When “Auto” is chosen Trilobite will

calculate its own vacuuming time.

When “On” is chosen, use to set

desired time, confirm by pressing .

When “Off” is chosen Trilobite will clean

until charging is needed.

For normal vacuuming, this is the

vacuuming time after wall mapping.

3. Press to commence vacuuming.

Language

Trilobite is able to present the

information on the display in a number

of different languages.

1. To change the display language, switch

on Trilobite and press .

2. Press until the displays asks if you

want to change the language. Press .

3. Press to select the desired language

and confirm by pressing .

Trilobite will now show display messages

in the selected language.

Status Messages

When you select a function, a status

message is shown on the display for about

seven seconds. After this, the name of the

function is shown again. It is of course

possible to change or confirm a displayed

function even while the status message is

shown.

Error Messages

The only faults that you can rectify

yourself are the ones listed below. In the

event of other error messages, recharge

and restart your Trilobite. If it still does

not start, contact our Customer Service

(see page 16).

The errors you can correct yourself are

presented below:

5. Check roller.

Is something stuck?

Is it incorrectly attached?

6. Check casters.

Is something stuck?

7. Check bumper.

Verify its spring action. Is something

stuck preventing it from moving?

12. Trilobite is stuck.

Move it and switch it on again. Also see

Normal Vacuuming on page 4.

15. Check dust cassette.

In most cases, the filter unit has probably

not been set or it is incorrectly set.

16. Check charger.

Is the charger plugged into an outlet?

Are the terminals on the charger and

Trilobite properly connected to each

other?

21. Moisture on the circuit board.

Let the machine dry out for 12 hours.

Then try restarting it.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare