Electrolux EWF14012 Bedienungsanleitung PDF herunterladen (Seite 9)

3.10 Prewash Touchpad

ENGLISH 9

Select this option if you wish your

laundry to be pre-washed before

the main wash. Use this option for

heavy soil.

The indicator of this option comes

on.

When selecting this option the

laundry is gently washed and spun

to avoid creasing. In this way

ironing is easier.

3.11 Easy Iron Touchpad

The indicator of this option comes

on.

Select this option to add

approximately 45 minutes of

tumbling in vapour during the wash

cycle. Vapour helps open fabric

fibers up to allow laundry additives

to release tough stains.

3.12 Vapour Touchpad

3.13 Start/Pause Touchpad

The indicator of this option comes

on.

Vapour may not necessarily be

visible inside the drum during a

vapour wash cycle. Vapour is

created below the drum and

allowed to naturally rise into the

clothes.

At the end of the Vapour cycle

the clothes will be warmer,

softer and detached from the

drum.

To start the selected program,

press the ‘Start/Pause’.

To interrupt a program which is

running, press the ‘Start/Pause’

to pause the machine.

To restart the program from the

point at which it was interrupted,

press the ‘Start/Pause’ again.

If you have chosen a delayed

start, after pressing ‘Start/Pause’

the machine will begin the

countdown.

If Vapour option is selected,

rinse temperatures will be

elevated.

During a vapour cycle you

may notice vapour exiting

from the drain hose of the

washing machine, this is

normal and there is no cause

for alarm.

Vapour may not be present during

the entire vapour wash cycle.

Vapour function is more effective

with half load.

NOTE:

When you set this function, put

the detergent into the “ ”

compartment. (Refer page 15-16)

This function increases the

program duration.

3.14

Buzzer Sounds

The program is completed.

The appliance has a malfunction.

The buzzer sounds operate when:

If you want to disable the buzzer

sound (except for event of

appliance

malfunction),

press “Rinse +” and

“Vapour” touchpads at the same

time for 3 seconds, and listen for

‘BEEP, BEEP’.

To return to default configuration

press these 2 touchpads at the

same time for 3 seconds, and listen

for ‘BEEP’.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare