Electrolux EWG127410W Bedienungsanleitung PDF herunterladen (Seite 31)

8

Front view

5 mm Hardwood strip

Additional pieces of

timber should run

from front to back

Drill four fixing holes (see Fig. 9).

9

Top view

Front edge

Position the base into the recess with its

front edge as far forward as the adjoining

plinth line will allow.

The reason for placing the base in this

position is to allow a small strip of

beading to be fitted in front of the ap-

pliance feet.

Fix the base firmly to the floor using four ap-

propriate countersunk screws (see Fig. 10).

10

600-605

490

5 x 25 x 605

Hardwood strip

5 mm x 25 mm

With the appliance installed adjust all four

feet ensuring the machine is stable, and a

clearance of approximately 5 mm is left be-

tween the top of the machine and the un-

derside of the worktop.

A final check for stability should be carried

out with the machine on spin with a load,

this will identify the need for any further fine

adjustment to the feet.

A strip of beading approximately 605 mm

W, x 5 mm H, x 25 mm D must be screwed

down into the base directly in front of the

machine’s feet, this will provide additional

security.

If required an additional door magnet, part

number 1242394-00/3 and disc, part num-

ber 1242393-00/5 are available from spare

parts.

electrolux 31

1 2 ... 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare