Electrolux EWW167580W Bedienungsanleitung PDF herunterladen (Seite 28)

4. Slide out the relevant plastic spacers.

5. Open the porthole and remove the pol-

ystyrene block fitted on the door seal.

6. Fill the smaller upper hole and the two

large ones with the corresponding plas-

tic plug caps supplied in the bag con-

taining the instruction booklet.

POSITIONING

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs

etc. Check that the machine does not

touch the wall or other kitchen units. Level

the washing machine by raising or lowering

the feet. The feet may be tight to adjust as

they incorporate a self locking nut, but the

machine MUST be level and stable. If nec-

essary, check the setting with a spirit level.

Any necessary adjustment can be made

with a spanner. Accurate levelling prevents

vibration, noise and displacement of the

machine during operation.

Caution! Never place cardboard,

wood or similar materials under the

machine to compensate for any

unevenness in the floor.

RUBBER FEET KIT (4055126249)

Available from your authorized dealer.

The rubber feet are particularly recommen-

ded on floating, slippery and wooden floors.

Mount the rubber feet to prevent vibration,

noises and displacement of the appliance

during operation.

Read carefully the instructions supplied with

the kit.

WATER INLET

Warning! This appliance must be

connected to a cold water supply.

1. Connect the water inlet hose supplied

with the machine to a tap with a 3/4"

thread. Always use the hose supplied

with the appliance.

Important! Do not use the hose from

your previous machine to connect to

the water supply.

28 electrolux

1 2 ... 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare