
4.
Touch or wait five seconds until
the appliance automatically starts to
work.
5.
When set time ends, an acoustic sig-
nal operates for two minutes. Symbol
flashes.
The appliance deactivates.
6.
Touch any sensor field to stop an
acoustic signal.
8.2 Automatic programmes with
weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1.
Activate the appliance.
2.
Touch .
3.
Touch or to set the weight
programme (refer to "Recipe book" ).
The display shows: cooking time, du-
ration symbol
, a default weight, a
unit of measurement (g).
4.
Touch or the settings save auto-
matically after five seconds.
5.
The appliance starts. The display
shows a symbol of the weight. During
this time you can change the default
weight value with
or . Touch
.
6.
When set time ends, an acoustic sig-
nal operates for two minutes.
flashes.
The appliance deactivates.
7.
Touch any sensor field to stop an
acoustic signal.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table
for roasting in the recipe book.
• The core temperature: refer to the table
for the core temperature sensor in the
recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1.
Activate the appliance.
2.
Put the point of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows
flashing and
the default set core temperature. The
temperature is 60 °C for the first op-
eration, and the last set value for each
subsequent operation.
4.
Touch or to set the core tem-
perature.
5.
Touch or the settings save auto-
matically after 5 seconds.
ENGLISH 13
Kommentare zu diesen Handbüchern