
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change
the time of day only when the oven is on.
DURATION To set how long the oven works.
END To set when the oven turns off.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set a countdown time. This function has no effect
on the operation of the oven. You can set the MI‐
NUTE MINDER at any time and also when the oven
is off.
00:00 COUNT UP TIMER To set the count up, which shows how long the oven
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DU‐
RATION and END are set.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
and 12:00.
"12" flashes.
1. Touch or to set the hours.
2. Touch
.
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch
again and again until starts to flash.
7.3 Setting the DURATION
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
4. Press or the DURATION time
starts automatically after 5 seconds.
5. Use or to set the hours for
DURATION time.
6. Press . The DURATION time
starts automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. and time
setting flash in the display. The oven
turns off.
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch
again and again until
starts to flash.
3. Use or to set the END and
to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes. and the
time setting flash in the display. The
appliance deactivates automatically.
www.electrolux.com12
Kommentare zu diesen Handbüchern