Electrolux ESL90600X Bedienungsanleitung PDF herunterladen (Seite 9)

Before using your dishwasher for the first time:

1. Ensure that the electrical and water connections comply

with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and then fill

with dishwasher salt

5. Fill the rinse aid dispenser

Note:

If you want to use the "3 in 1" combi detergents, carefully

read the information given in "Different kinds of

detergents".

The water softener

The dishwasher is equipped with a water softener designed to

remove minerals and salts from the water supply, which would

have a detrimental or adverse effect on the operation of the

appliance.

The higher the content of these minerals and salts, the harder

your water is.

Water hardness is measured in equivalent scales, German

degrees (°dH), French degrees (°TH) and mmol/l (millimol per

litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of

the water in your area. Your local Water Authority can advise

you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using

the water hardness dial and electronically, using the function

buttons on the control panel.

a) Setting manually

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to position 1 or 2 (see table).

4. Replace the lower

basket.

The dishwasher is factory set

at position 2.

b) Setting electronically

(The dishwasher must be switched off)

The dishwasher is factory set at level 5.

1. Press the On/Off push button. The indicator light of the

programme selection push button will illuminate and in the

digital display are visible 2 horizontal lines (--) (setting

mode).

If in the digital display are not visible the 2 horizontal lines,

this means that a washing programme has been selected.

The programme must be cancelled.

Press the push button Cancel for about 3 seconds.

The indicator light of the programme selection push button

will illuminate and in the digital display will appear 2

horizontal lines, this means that the selected washing

programme has been cancelled and the machine is now in

setting mode.

2. Press simultaneously function buttons 2 and 3, until the

indicator lights of the function buttons 1, 2 and 3 start

flashing.

3. Press function button 1, the indicator lights of function

buttons 2 and 3 turn off while the indicator light of the

button 1 goes on flashing, the digital display indicates the

current level and a sequence of intermittent audible signals

are heard.

The current level is indicated by the number visible in the

display and the number of intermittent audible signals

heard.

Example:

displayed + 5 audible signals = level 5.

4. To change the level, press function button 1. Each time the

button is pressed the level changes. (For the selection of

the new level see the chart).

Examples:

if the current level is 5, by pressing button 1 once, level 6 is

selected.

if the current level is 10, by pressing button 1 once, level 1

is selected.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after

which the dishwasher will automatically return to setting

mode.

Prior to using for the first time

°dH

°TH mmol/l Range

manually

electronically

51 - 70

43 - 50

37 - 42

29 - 36

23 - 28

19 - 22

15 - 18

11 - 14

4 - 10

< 4

9,0 - 12,5

7,6 - 8,9

6,5 - 7,5

5,1 - 6,4

4,0 - 5,0

3,3 - 3,9

2,6 - 3,2

1,9 - 2,5

0,7 - 1,8

< 0,7

III

I/II

91 - 125

76 - 90

65 - 75

51 - 64

40 - 50

33 - 39

26 - 32

19 - 25

7 - 18

< 7

level 10

level 9

level 8

level 7

level 6

level 5

level 4

level 3

level 2

level 1

yes

Water hardness Adjusting the water

hardness setting

Level indicated

on the

digital display

Use

of salt

Number of

audible

signals

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux ESL90600X Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler Electrolux ESL90600X