Electrolux ER1825D Bedienungsanleitung PDF herunterladen (Seite 5)

Door reversibility

Before carrying out the operations described below,

pull out the mains plug from the wall socket.

To carry out door reversal operate as follows:

Remove bottom hinge (1).

Slide out the lower door from middle hinge (H) and re-

move the latter.

Slide out the upper door from pin (5), unscrew the lat-

ter and then screw it down into the hinge provided on

the opposite side.

Remove the two plugs, to reveal the holes for the

hinge pivots, and remount them on the other side.

Reﬁt the upper door and the middle hinge on the op-

posite side.

Unscrew part (6) and reﬁt it on the opposite side.

Reﬁt the lower door and bottom hinge (1) on the op-

posite side.

Remove the screw cover on the handle, unscrew the

handle and reﬁt it on the opposite side.

The unused opening direction is concealed by plastic

plugs. Therefore, these plugs are to be mounted on

the holes left free.

The doors can be aligned by adjusting the middle

hinge horizontally, with the help of a tool, after having

slackened two screws, as shown in Fig. 2.

Attention

After completion of the door reversibility operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not ﬁt perfectly to the cabinet. In that

case, wait for the natural ﬁtting of the gasket or accel-

erate this process by heating up the part involved with

a normal hairdrier.

Fig. 2

Fig. 3

Fig. 4

Fig. 5

D548

D405

D646

D426

1 2 3 4 5 6 7 8 9

Keine Kommentare

Electrolux ER1825D Bedienungsanleitung Seite 5