Electrolux ER2336I Bedienungsanleitung PDF herunterladen (Seite 8)

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little plates over the

runners and screw in the screws provided

(3.5x16 mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted holes.

At the end of the procedure, check that the doors of

the appliance and the kitchen unit open properly.

Inner door reversal

Using a screwdriver release bracket (1) by pressing on

the internal spring (Fig. 10) and withdraw it from its

seat together with the door;

remove plug (2) and ﬁt it in the hole left open on the

opposite side;

turn the door through 180°, remove the bracket (1)

and reﬁt it on the opposite side.

Reﬁt the door and insert the top pin and bottom

bracket (1), pushing it into place.

To ensure correct storage of food, the door is ﬁtted

with a simple spring device which holds it in the open

position until it is properly closed.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

Fig. 9

Fig. 10

PR35

PR140

180°

TECHNICAL SPECIFICATION

The technical data is indicated in the rating plate on the left side inside the appliance.

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

Electrolux ER2336I Bedienungsanleitung Seite 8