electrolux 29
GB
Regular cleaning
It is recommended to wash the inside
of the refrigerator in 3-4 weeks time.
Household cleaner or soap must not
be used.
After you made it no-current wash
the appliance using lukewarm water
and wipe it.
Clean the magnet door rubber profile
with clean water.
After cleaning plug the appliance to
the mains socket.
Dust and dirt collected on the back of
the refrigerator, condenser is
recommended to be removed and
clean the evaporative tray on top of
the compressor once or twice a year.
When the refrigerator is not in
use
In case the appliance will not be
used for a long time follow these
steps:
Break the circuit of the appliance.
Remove foods from the refrigerator.
Defrost and clean it as written
before.
Leave the door open to avoid a build
up of air inside.
Trouble shooting
How to change the bulb
Should the light fail to work you can
change it as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the
lamp cover, then take the lamp cover
off in the direction of arrow and the
bulb can be changed. (Type of the
bulb: Mignon 322, 230 V, 15 W, E 14
thread)
After changing bulb replace the lamp
cover, screw the plate screw and
apply voltage to the appliance.
The lack of light does not influence
operation of the refrigerator.
If something does not work
During operation of the appliance
some smaller but annoying trouble
can often occur, which does not
require calling a technician out. In
the following chart information is
given about them to avoid
unnecessary charges on service.
We draw your attention that
operation of appliance goes with
certain sounds (compressor- and
circulating sound). This is not
trouble, but means normal operation.
We draw it to your attention
again that the appliance
operates discontinuously, so the
stopping of compressor does not
mean being no-current. That is why
you must not touch the electrical
parts of the appliance before
breaking the circuit.
Kommentare zu diesen Handbüchern