
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner applicable for the
surface of the hob.
WARNING!
Do not use knives, scrapers
or similar instruments to clean
the surface of the glass or
between the rims of the
burners and the frame (if
applicable).
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
6.2 Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily
clean the hob.
Be very careful when you
replace the pan supports
to prevent the hob top
from damage.
2. The enamel coating occasionally can
have rough edges, so be careful when
you wash the pan supports by hand
and dry them. If necessary, remove
stubborn stains with a paste cleaner.
3. After you clean the pan supports,
make sure that they are in correct
positions.
4. For the burners to operate correctly
make sure that the arms of the pan
supports are aligned with the centre of
the burner.
6.3 Removing pan supports
After cleaning hobs, make sure that pan
supports are in a correct position. In order
to properly place the pan supports, make
sure that an arm of the pan support is
positioned in correspondence with the
grips placed at the base of the burner as
shown in the picture. This way, the pan
support will be stable and fixed.
6.4 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the hob.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and some detergent. After
cleaning, rub the hob dry with a soft
cloth.
6.5 Cleaning the flame spreader
You can wash the flame
spreaders in a dishwasher.
WARNING!
Let the flame spreaders cool
down before you clean them.
www.electrolux.com10
Kommentare zu diesen Handbüchern