Electrolux EHL20CN Bedienungsanleitung PDF herunterladen (Seite 26)

min.

3 mm

11.2 Installing the oven under a

work surface

Installation into flammable

material must agree with NIN

SEV 1000 (Swiss Association

of the Cantonal Fire

Insurance Companies) fire

protection guidelines and

regulations.

A = appliance, N = recess

1. Install the hob according to the

installation instruction number

374307900 / 374307901.

Before insert the oven into cabinet's

recess make sure to carry out the

hotplate socket and use the correct

socket connections. There is no need

to use a separate earthing.

2. Use the side handles to hold the oven

and slide it flush into the recess.

Make sure the cable is free when you

slide the appliance.

N 560-568 mm

115 mm

20

mm

442 mm

180

mm

A 595

mm

N 600

mm

A 592 mm

A 567

mm

N min.

550 mm

~50 mm

A A

B

3. Use a minimum of 2 screws to attach

the oven on the 2 sides (A).

When installing next to a wood-fuelled

boiler, a heatproof and heat-insulating

plate must be mounted at the height

of the appliance and at least 30 cm

deep.

A B

A

min. 20 mm

10

mm

20 mm

11.3 Electrical connection

WARNING!

If service is required always

disconnect the appliance

from the power supply.

Use a power cable of H05VV-F or higher.

Install the appliance with a socket supply

line. If there is no socket supply line, the

fixed home electrical system must include

an isolating device with at least a 3 mm-

contact separation to enable a

simultaneous and all-pole cut off from the

mains (according to NIN SEV 1000). The

customer must have a socket for the

electrical connection that is accessible

and outside the coordination room. The

length of the connection cable must be

www.electrolux.com26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare