Electrolux EHT332X Bedienungsanleitung

1Model No. EHT 332 XProduct No 949 600 267Serial No.INSTRUCTION BOOK RUS

10Maintenance and cleaningStainless steel surfacesPerform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid scouring c

11Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted i

12necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorporated in t

13Gas installationIn accordance with local requirements for domestic gas cooking appliances.Gas installation must only be carried out by an authorised

14Type of gasAdjusted to natural gas (20 mbar)Category and pressuresII2H3B/P 20-30 mbar.Max. nominal load Q na HS:Medium sized burner = 1,9 kW x 1Larg

15Check to see whether a fuse has blown.Check to see whether the relay is switched off.If the problem is not with the fuse or relay, do not attempt to

16325 87-8457 Rev. 1-401

2Contents Page noImportant to know ... 3Faults ...

3Important to knowService and repair may only be performed by the distributor, or by a service organization approved by the distributor. Only repair p

4Product liabilityOur liability is limited to that which is stipulated by law, and covers only damage to persons and property, which results from def

5SafteyTo enable the consumer to locate any leaks in the installation, a smelling substance has been added to all gas qualities available in the marke

6FaultsQuestion:There is no spark when lighting the gas?When the operating knob is released the gas ring goes out again?The gas ring burns very uneven

7Burner markingsSigns at each operating knob indicate which burner is to be adjusted with the knob in question.Back BurnerFront burnerPanel markingsEa

8Burner cover/burner ringTogether with the burner ring the burner cover forms a space where the final mixture of gas and air takes place in order to m

91. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position)2. The ignition electrode will emit