Electrolux EKG913A4OX Bedienungsanleitung PDF herunterladen (Seite 28)

2. Put the knob back.

3. Connect the appliance to the

electricity.

Changing from liquid gas to

natural gas

1. Unscrew approximately one turn the

bypass screw position A.

2. Put the knob for the oven functions

back.

3. Connect the appliance to the

electricity.

WARNING!

Put the mains plug into

the mains socket only if

all parts are back into

their initial position.

There is a risk of injury.

4. Light the burner.

Refer to "Oven - Daily use" chapter.

5. Turn the knob for the oven functions

on the minimum position.

6. Remove the knob for the oven

functions again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the oven functions

back.

9. Set the maximum gas flow position

on the knob for the oven functions

and let the oven heat for at least 10

minutes.

10. Quickly turn the knob for the oven

functions from maximum to the

minimum gas flow position.

Control the flame. Make sure the flame

does not go out when you turn the knob

to the minimum gas flow position. There

must be a small regular flame on the

oven burner crown. If the flame goes out

adjust the oven burner again.

14.14 Levelling

CAUTION!

Remove all the accessories

from the oven.

1. Open the lid of the appliance and

disassemble the lid, the pan supports

and all the burner assemblies.

2. Put the appliance on the sidewall on

a clean and smooth surface. Place

each foot into a separate hole, in the

plinth, and rotate it counterclockwise.

B

3. If the floor is not equally flat, use the

adjustable feet on the bottom of the

appliance to set a stable position for

the appliance.

www.electrolux.com28

1 2 ... 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare