Electrolux ERCE9025BK Bedienungsanleitung PDF herunterladen (Seite 7)

electrolux canopy rangehoodrangehoodinstallation7

Dependingonthepreferredinstallation/ductingmode,follow

step 6a or 6b below.

6a. Recirculating mode(Fig.D).Usingthecentreline,

securetherecirculatingT-piecetothewallwithsuitable

screws/xings(optionalkitAR610RK).Installexiblepipe

betweenT-pieceandtheexhausttransitionduct.

Usecabletiesorsuitableducttapetosecureexible

pipetoT-pieceandtransitionduct(Fig.F).

NOTE: When installed in recirculating mode, it is

recommended to use a carbon ﬁlter (included in

recirculation kit AR610RK) to prevent odours being

emitted back into the room.

6b. Ducted mode(FigE.)Thecanopyrangehoodhasbeen

suppliedwithexibleuepipeandducttransitionpiece,

alternativelya150mmdiameternon-combustibleue

pipe can be used. Continue the centre line to the ceiling.

Fitpreferreduepipetothefantransitionduct(Fig.F).

Usecabletiesorsuitableducttapetosecureexible

pipe to the transition duct.

NOTE: For ducted mode, we recommend extending

ﬂue pipe through the roof to external “china hat” to vent

exhaust externally. We do not recommend venting into

ceiling cavity.

NOTE: To ensure optimum performance of the

rangehood, the use of rigid ducting is recommended.

The use of bends should be avoided. Rigid ﬂexible

ducting is suitable, although loose ﬂexible ducting is

unacceptable. All ducting must be ﬁre retardant.

Fig. D Fig. E

7. Electrical connection

Check that the installation complies with the standards

of local building, gas and electrical authorities. Before

connecting to the mains supply ensure that the mains

voltage corresponds to the voltage on the rating plate

inside the rangehood.

Fig. F

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Electrolux ERCE9025BK Bedienungsanleitung Seite 7