Electrolux GK58TSIPO Bedienungsanleitung PDF herunterladen (Seite 16)

8.2 Connection cable

• The appliance is supplied with the con-

nection cable.

• Replace the damaged mains cable with

a special cable (type H05VV-F or high-

er). Speak to your local Service Centre.

8.3 Electrical connection

• Install the appliance with a socket sup-

ply line. If there is no socket supply line,

the fixed home electrical system must

include an isolating device with at least

a 3 mm-contact separation to enable a

simultaneous and all-pole cut off from

the mains (according to NIN SEV 1000).

400

blue

black

brown

L2

2

blue

brown

1

...240V

230V

8.4 To attach the seal to the

rabbet

• Clean the rabbet in the work surface.

• Bond the seal stripe supplied on the

upper surface of the rabbet along the

edges of the cut out section.

• Cut the seal stripe into four pieces in re-

lation to the length of the edges of the

rabbet.

• For the four corners of the rabbet the

ends of the seal stripes must be cut in-

to mitres. Do not bond the ends over

one another.

• Bond the seal stripe flush into the cor-

ner of the rabbet. Make sure that no sil-

icon compound can get below the

glass ceramic when grouting.

• Do not extend the tapes.

8.5 Assembly

min.

50mm

min.

500mm

min.

2mm

16

www.electrolux.com

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare