Electrolux GK69TSCN Bedienungsanleitung PDF herunterladen (Seite 9)

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct heat

setting.

4.4 Activating and deactivating

the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

4.5 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at

the desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch a desired heat setting.

After 3 seconds comes on.

To deactivate the function: change the

heat setting.

4.6 Timer

You can set one timer function for each

cooking zone separately. To set a timer

function for the zones on the left side use

the timer on the left, for the zones on the

right, the timer on the right.

Count Down Timer

Use this function to specify how long a

cooking zone should operate during a

single cooking session.

First set the heat setting for the cooking

zone and then set the function.

To activate the function or change the

time: touch

quickly again and again

until the indicator of a given zone lights

up on the display. Then touch or to

set the time (00 - 99 minutes). The

function starts automatically after 4

seconds.

comes on the display.

To activate the timer function for the

second zone in a pair touch 3 times

quickly.

When the time comes to an end, a signal

sounds and 00 flashes. Touch to stop

the signal.

To see the remaining time: touch .

To deactivate the function: choose the

desired zone touching and then touch

. The remaining time counts back to 00.

The symbol goes out.

CountUp Timer (The count up

timer)

You can use this function to monitor how

long a cooking zone operates.

To activate the function: for the first

zone in a pair touch twice quickly. The

function starts automatically when

lights up. To activate the function for the

second zone in a pair touch 4 times

quickly.

To see how long the cooking zone

operates: touch

. The display shows

the time, at first in seconds then in

minutes.

To deactivate the function: choose the

desired zone touching and then touch

. The symbol goes out.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare