Electrolux GK69TSCN Bedienungsanleitung PDF herunterladen (Seite 10)

Count Down Timer

Use this function to specify how long a

cooking zone should operate during a

single cooking session.

First set the heat setting for the cooking

zone and then set the function.

To activate the function or change the

time: touch

quickly again and again

until the indicator of a given zone

lights up on the display. Then touch

or to set the time (00 - 99 minutes).

The function starts automatically after 4

seconds. comes on the display.

To activate the timer function for the

second zone in a pair touch 3 times

quickly.

When the time comes to an end, a signal

sounds and 00 flashes. Touch

to stop

the signal.

To see the remaining time: touch .

To deactivate the function: choose the

desired zone touching and then touch

. The remaining time counts back to

00. The symbol goes out.

CountUp Timer (The count up

timer)

You can use this function to monitor how

long a cooking zone operates.

To activate the function: for the first

zone in a pair touch twice quickly.

The function starts automatically when

lights up. To activate the function for

the second zone in a pair touch 4

times quickly.

To see how long the cooking zone

operates: touch . The display shows

the time, at first in seconds then in

minutes.

To deactivate the function: choose the

desired zone touching and then touch

. The symbol goes out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated but the

cooking zones do not operate.

To activate the function: touch quickly

again and again until the indicator

of a

given zone lights up on the display.

Touch or to set the time. The

function starts automatically after 4

seconds. comes on the display.

When the time comes to an end, a signal

sounds and 00 flashes. Touch to stop

the signal.

The function has no effect

on the operation of the

cooking zones.

4.7 Pause

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, all other

symbols on the control panels are

locked.

When the function is active, and

symbols can be used. The function does

not stop the timer functions:

and .

Touch to activate the function.

comes on. The heat setting is lowered

to 1.

To deactivate the function, touch

. The

previous heat setting comes on.

4.8 Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch

.

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare