Electrolux EOZ3430DAX Bedienungsanleitung PDF herunterladen (Seite 23)

A

2. Hold the inner glass B tightly with both

hands and slide it upwards to remove

it from its initial position. Do the same

with the other glass panels.

Make sure that you tightly hold the

glasses to prevent them from falling.

B

3. Clean the door with a wet sponge and

rub it dry with a soft cloth. Do not use

steel wool, acids or abrasive cleaning

agents because they can damage the

surface.

When the oven door is clean, install the

glass panels in the opposite sequence.

Make sure that you put the glass panels

(A, B and C) back in the correct sequence.

The glass panel (C) has a small dot on the

top, the middle panel (B) has a decorative

frame. In some models, the glass panel (A)

has screen printings. In others, it is

transparent. The screen-printing zone

must face the inner side of the door. Make

sure that after the installation the surface

of the glass panel frame is not rough when

you touch it.

A

B

C

10.7 Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen lamp

with a cloth to prevent grease

residue from burning on the

lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

ENGLISH

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare