
Symbol Function
Time Indication The display shows how long the
heating function operates. Press
and at the same time to reset
the time.
Calculation The appliance calculates the time
for cooking.
Heat-up Indicator The display shows the temperature
in the appliance.
Fast Heat Up Indicator The function is active. It decreases
the heat up time.
Weight Automatic The display shows that the automat‐
ic weight system is active or that
weight can be changed.
Heat + Hold The function is active.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast,
the display brightness and the time of the
day.
1. Press or to set the value.
2. Press
to confirm.
5.3 Calibration
For the best results with the function:
Auto Cooking, you must calibrate the
appliance. The calibration time is 4
hours.
If you use manual cooking
only, you can ignore this
procedure.
Conditions:
• The temperature in the kitchen must
be below 35 °C.
• Install the appliance in its permanent
location.
• Connect the appliance to the mains
supply and do not disconnect it again.
• If you change the appliance location
or electrical connection, you must do
the steps again.
Calibration:
1. Activate the appliance.
2. Select the menu: Basic Settings and
press OK.
3. Select the function: Calibration and
press OK.
www.electrolux.com10
Kommentare zu diesen Handbüchern