Electrolux EPH12MLIWI Bedienungsanleitung PDF herunterladen (Seite 11)

ENGLISH 11

8 °C heating function

In HEAT mode, simultaneously press

the ION-FILTER button and the CLOCK

button to enable or disable the 8 °C

heating function. The display shows

”8 °C” (”46 °F”). The unit starts to heat

when the temperature drops below

8 °C. Fan Speed will be AUTO and

cannot be changed.

Replacng the batteries

The remote control operates with two

1.5V AAA batteries.

1. Open the battery compartment.

2. Remove the old batteries.

3. Insert the new batteries. Make sure

that the positive (+) and negative (-)

markings on the batteries match the

positive (+) and negative (-) markings

on the battery compartment.

4. Close the battery compartment.

CAUTION

type. Do not use old batteries or

different batteries types.

remote control will not be used for a

long time.

NOTE

transmitting and receiving range.

1 m away from your TV set or stereo

sound set.

of the main unit to improve the

receiving sensitivity of the main unit.

signal, the transmitting symbol will

blink for 1 second. The bell will ring if

the main unit receives the signal.

normally, remove the batteries

and insert them again 30 seconds

later. If the remote control still does

not operate normally, replace the

batteries.

Emergency operation

If the remote control cannot be used,

use the AUTO/STOP button on the

main unit. The unit will operate in AUTO

mode. The temperature or fan speed

cannot be changed.

1. Press the AUTO/STOP button

to switch on the unit. The unit

automatically sets the operation

mode.

2. Press the AUTO/STOP button again

to switch off the unit.

Mode Model Temperature setting Fan speed

AUTO Cooling only 25 °C (COOL, FAN) AUTO

AUTO Heat pump 25 °C (COOL, FAN) AUTO

AUTO Heat pump 20 °C (HEAT) AUTO

3 times and unlock the remote control.

If the remote control is unlocked, the

LOCK symbol will not be shown.

Celsius (°C) ~ Fahrenheit (°F)

If the unit is switched off, simultaneously

press the SWING-H button and the

ION-FILTER button to switch between

Celsius (°C) and Fahrenheit (°F).

Energy-saving function

In COOL mode, simultaneously press

the ION-FILTER button and the CLOCK

button to enable or disable the energy-

saving function. The display shows ”SE”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare