Electrolux EHGL30XDCN Bedienungsanleitung PDF herunterladen (Seite 11)

6.2 Setting the time. Changing

the time

You must set the time before you operate

the oven.

The flashes when you connect the

appliance to the electrical supply, when

there was a power cut or when the timer

is not set.

In case of a power cut up to

1 hour, the time of day is

shown and flashes. Make

sure that the time is correct

and press to stop the

flashing.

In case of a power cut longer

than 1 hour, you must set the

time again.

Press the or to set the correct time.

After approximately five seconds, the

flashing stops and the display shows the

time of day you set.

To change the time of day press again

and again until

starts to flash.

6.3 Setting the DURATION

1. Set an oven function and temperature.

2. Press

again and again until

starts to flash.

3. Press or to set the DURATION

time.

The display shows

.

4. When the time ends, flashes and

an acoustic signal sounds. The

appliance deactivates automatically.

5. Press any button to stop the acoustic

signal.

6. Turn the knob for the oven functions

and the knob for the temperature to

the off position.

6.4 Setting the END

1. Set an oven function and temperature.

2. Press again and again until

starts to flash.

3. Press or to set the time.

The display shows .

4. When the time ends, flashes and

an acoustic signal sounds. The

appliance deactivates automatically.

5. Press any button to stop the signal.

6. Turn the knob for the oven functions

and the knob for the temperature to

the off position.

6.5 Setting the TIME DELAY

1. Set an oven function and temperature.

2. Press again and again until

starts to flash.

3. Press or to set the time for

DURATION.

4. Press .

5. Press

or to set the time for

END.

6. Press to confirm.

Appliance turns on automatically later on,

works for the set DURATION time and

stops at the set END time. At the set time

an acoustic signal sounds.

7. The appliance deactivates

automatically. Press any button to

stop the signal.

8. Turn the knob for the oven functions

and the knob for the temperature to

the off position.

6.6 Setting the MINUTE MINDER

1. Press again and again until

starts to flash.

2. Press or to set the necessary

time.

The Minute Minder starts automatically

after 5 seconds.

3. When the set time ends, an acoustic

signal sounds. Press any button to

stop the acoustic signal.

4. Turn the knob for the oven functions

to the off position.

6.7 Cancelling the clock

functions

1. Press the again and again until the

necessary function indicator starts to

flash.

2. Press and hold .

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare