Electrolux EOC6851AAX Bedienungsanleitung PDF herunterladen (Seite 37)

12.2 Stainless steel or aluminium

appliances

Clean the oven door with a

wet sponge only. Dry it with a

soft cloth.

Do not use steel wool, acids

or abrasive materials as they

can damage the oven

surface. Clean the oven

control panel with the same

precautions.

12.3 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support away

from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove it.

1

2

Install the shelf supports in the opposite

sequence.

The retaining pins on the

telescopic runners must point

to the front.

12.4 Pyrolysis

CAUTION!

Remove all accessories and

removable shelf supports.

CAUTION!

Before your start the cleaning

procedure, make sure that

the water tank is empty.

Refer to "Emptying the water

tank".

The pyrolytic cleaning

procedure cannot start:

• if you did not remove the core

temperature sensor plug from the

socket.

• if you did not fully close the oven door.

Remove the worst dirt manually.

CAUTION!

If there are other appliances

installed in the same cabinet,

do not use them at the same

time as the function:

Pyrolysis. It can cause

damage to the appliance.

1. Clean the inner side of the door with

hot water, so that the residues do not

burn from the hot air.

2. Activate the appliance and select from

the main menu the function: Pyrolysis.

Press to confirm.

3. Set the duration of the cleaning

procedure:

Option Description

Quick 1 h for a low

degree of dirt

Normal 1 h 30 min

for a usual

degree of dirt

Intense 2 h 30 min

for a high de-

gree of dirt

4. Touch to confirm.

ENGLISH

37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare