Electrolux EOR3420AOW Bedienungsanleitung PDF herunterladen (Seite 20)

You can remove the heating element to

clean the oven ceiling more easily.

1. Remove the screw which holds the

heating element. For the first time, use

a screwdriver.

2. Carefully pull the heating element

down.

3. Clean the oven ceiling with a soft cloth

with warm water and a cleaning agent,

and let it dry.

Install the heating element in the opposite

sequence.

Install the shelf supports.

WARNING!

Make sure that the heating

element is correctly installed

and that it does not fall down.

10.6 Cleaning the oven door

The oven door has three glass panels.

You can remove the internal glass panels

to clean them.

CAUTION!

Do not use the appliance

without the glass panels.

The direction in which you

open the door depends on

your oven model. You open

the door from the right side in

some models and from the

left side in others.

1. Press the buttons at the sides of the

door trim (A) on the upper cover and

pull it upwards to remove it.

A

2.

Hold the inner glass B tightly with both

hands and slide it upwards to remove

it from its initial position. Do the same

with the second glass panel.

Make sure that you tightly hold the

glasses to prevent them from falling.

B

3. Clean the door with a wet sponge and

rub it dry with a soft cloth. Do not use

steel wool, acids or abrasive cleaning

agents because they can damage the

surface.

When the oven door is clean, install the

glass panels in the opposite sequence.

The middle glass panel has a small dot on

the top and the second one has screen

printings. Make sure that you put the

middle glass panel in the correct seats.

The screen-printing zone must face the

inner side of the door. Make sure that after

the installation the surface of the glass

panel frame is not rough when you touch

it.

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare