
1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
1.7 Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refrigerant
circuit or insulation materials. The
appliance shall not be discarded
together with the urban refuse and
rubbish. The insulation foam con-
tains flammable gases: the appli-
ance shall be disposed according
to the applicable regulations to
obtain from your local authorities.
Avoid damaging the cooling unit,
especially at the rear near the heat
exchanger. The materials used on
this appliance marked by the sym-
bol
are recyclable.
2. CONTROL PANEL
1 2 3 4
5
1
Alarm light
2
Pilot light
3
Action Freeze light
4
Temperature regulator
5
Action Freeze button
Alarm reset button
2.1 Switching on
Insert the plug into the wall socket.
The pilot light will light up.
Turn the Temperature regulator clockwise
to a medium setting.
If the temperature inside the appli-
ance is too high the Alarm light will
light up.
2.2 Switching off
To turn off the appliance, turn the Tem-
perature regulator to the "O" position.
The Pilot light stay ON until the
appliance is disconnected from
the power socket.
2.3 Temperature regulation
The temperature is automatically regula-
ted.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature regulator counter
clockwise to obtain warmer storage
temperature.
• turn the Temperature regulator clock-
wise to obtain colder storage tempera-
ture.
A medium setting is generally the
most suitable.
The exact setting should be chosen keep-
ing in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
ENGLISH 5
Kommentare zu diesen Handbüchern