Electrolux ZA2 Bedienungsanleitung PDF herunterladen (Seite 13)

English 11

Vacuuming Programs

Normal. Timer: Auto

Select program?

Quick. Timer: 10min

Select program?

Spot

Select program?

Normal vacuuming

When you start Trilobite it is ready to start

vacuuming using the Normal program and

automatic time calculation.

1. When Trilobite is switched off or placed

in the charger, press to start.

2. Press to start vacuuming.

Changing the time setting

This may be necessary when vacuuming

floor surfaces of 40 m

2

.

1. Press twice until “Select timer?”

is shown, confirm by pressing .

2. Set the desired time setting by pressing

and then confirm with .

(When “On” is chosen, use to set

desired time, confirm by pressing .

This is the vacuuming time after wall

mapping.)

3. Press to commence vacuuming.

Never start vacuuming at distances

under 0.5 m from a magnetic strip, staircase

or level difference. Vacuuming can always

be interrupted by pressing . After this,

pressing recommences vacuuming, while

pressing will call up the menu.

Quick vacuuming

The Quick program is identical with Normal

vacuuming except that edge cleaning is not

included. Vacuuming takes shorter time with

the duration preset to 10 minutes, however,

the vacuum result may be slightly inferior.

1. After you have switched on Trilobite,

press until “Select program?” is shown.

Confirm by pressing .

2. Use until “Quick” is displayed and

confirm by pressing .

3. If you don’t want to change the time

setting, press twice and start

vacuum ing by pressing . If you would

like to change the time sett ing, please

follow the next steps instead of step 3.

4. Confirm the option “Select timer?”

by pressing .

5. Set the desired time setting by pressing

and then confirm with .

(When “On” is chosen, use to set

desired time, confirm by pressing .)

6. Press to commence vacuuming.

Never start vacuuming at distances

under 0.5 m from a magnetic strip, staircase

or level difference. Vacuuming can always

be interrupted by pressing . After this,

pressing recommences vacuuming, while

pressing will call up the menu.

Spot vacuuming

Use Spot vacuuming to quickly vacuum

a limited area, like if you have spilled some-

thing. The area that is vacuumed is approx.

1-m

2

with Trilobite placed in the centre of

the area. The area is vacuumed twice.

1. After you have switched on Trilobite,

press until “Select program?” is shown.

Confirm by pressing .

2. Use until “Spot” is displayed and

confirm by pressing .

3. Put Trilobite in the centre of the area to

be vacuumed and start vacuuming by

pressing .

Do not under any circumstances

vacuum liquids or lit or glowing objects,

e.g. cigarette butts.

Never start vacuuming at distances

under 0.5 m from a magnetic strip, staircase

or level difference. Vacuuming can always

be interrupted by pressing . After this,

pressing recommences vacuuming, while

pressing will call up the menu.

Trilobite_2_Eng_Fi_Ru.indd 11Trilobite_2_Eng_Fi_Ru.indd 11 04-07-01 15.18.1004-07-01 15.18.10

1 2 ... 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare