Electrolux EBGL4XSP Bedienungsanleitung

EBGL4X... ...EN OVEN USER MANUAL

DISPLAYFABCE DGA)Heating function symbolB)Temperature/time displayC)Clock/residual heat display (also MinuteMinder and Time of Day)D)Residual heat ind

DAILY USEWARNING!Refer to "Safety information" chap-ter.To operate the appliance you can use:• manual mode - to set a heating func-tion, the

When the appliance is at the set tempera-ture, an acoustic signal sounds three times.The heat-up indicator goes off the display.CHECKING THE TEMPERATU

CLOCK FUNCTIONSSYM-BOLFUNCTION DESCRIPTIONTIME OF DAY To show the time of day. To change the time of day, re-fer to 'Setting the time of day&apos

6.Touch a sensor field to stop the acous-tic signal.SETTING THE TIME DELAYFUNCTIONDURATION and END can be usedat the same time, if the appliance i

AUTOMATIC PROGRAMMESWARNING!Refer to "Safety information" chap-ter.There are 9 automatic programmesand recipes. Use an automatic pro-gramme

USING THE ACCESSORIESWARNING!Refer to "Safety information" chap-ter.CORE TEMPERATURE SENSORThe core temperature sensor measures thecore temp

When you cook with the core tem-perature sensor, you can changethe temperature shown in the Tem-perature / Time display. After youput the core tempera

ADDITIONAL FUNCTIONSMY FAVOURITE PROGRAMMEFUNCTIONUse this function to save your favourite set-tings of temperature and time for a heatingfunction or

5.Touch / to change the value ofthe setting.6.Touch .AUTOMATIC SWITCH-OFFFor safety reasons the appliance deacti-vates automatically after some

CONTENTSSAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3PRODUCT

CARE AND CLEANINGWARNING!Refer to "Safety information" chap-ter.Notes on cleaning:• Clean the front of the appliance with asoft cloth with w

122.Pull the rear end of the shelf supportaway from the side wall and remove it.Installing the shelf supportsInstall the shelf supports in the opposit

2.Clean the glass cover.3.If necessary, replace the oven lampwith applicable 300 °C heat-resistantoven lamp.4.Install the glass cover.Replacing the si

WHAT TO DO IF…WARNING!Refer to "Safety information" chap-ter.Problem Possible cause SolutionThe appliance does notheat up.The appliance is d

Serial number (S.N.) ...24www.electrolux.com

INSTALLATIONWARNING!Refer to "Safety information" chap-ter.The handle can be replaced tomatch the décor of your kitchen.The change must be d

INSTALLING THE OVEN UNDER A WORK SURFACEAAAABDAAca.5043560016020A 757A 767N 762 + 3N 780A 548N 550170WARNING!Installation into flammable materialmust

DEFOnly a qualified person can con-nect the appliance to the electricitysupply.1.Open the mains terminal cover (D).2.Put the connection cable into the

CH GARANTIE, GARANZIA, GUARANTEEKUNDENDIENST, SERVICE-CLIENTÈLE, SERVIZIO CLIENTI,CUSTOMER SERVICE CENTRESServicestellen Points de Service Servizio do

ENVIRONMENT CONCERNSRecycle the materials with the symbol .Put the packaging in applicable containersto recycle it.Help protect the environment and h

SAFETY INFORMATIONBefore the installation and use of the appli-ance, carefully read the supplied instruc-tions. The manufacturer is not responsibleif

30www.electrolux.com

ENGLISH 31

www.electrolux.com/shop 892934967-B-482011

USEWARNING!Risk of injury, burns or electricshock or explosion.• Use this appliance in a household envi-ronment.• Do not change the specification of t

DISPOSALWARNING!Risk of injury or suffocation.• Disconnect the appliance from the mainssupply.• Cut off the mains cable and discard it.• Remove the do

PRODUCT DESCRIPTION1125468910112 37543211Control panel2Electronic programmer3Heated drawer indicator (for selectedmodels only)4Socket for the core tem

Storage drawerBelow the oven cavity is the storage draw-er.WARNING!The storage drawer can becomehot when the appliance operates.Do not store any fla

BEFORE FIRST USEWARNING!Refer to "Safety information" chap-ter.INITIAL CLEANING ANDPREHEATING• Remove all parts from the appliance.• Clean t

CONTROL PANELELECTRONIC PROGRAMMER12 3 4 5 6 7 8 9 10Use the sensor fields to operate the appli-ance. SensorFieldFunction Description1- DISPLAY Shows