Electrolux EOA3430AOX Bedienungsanleitung PDF herunterladen (Seite 43)

2

1

2.

Pull the rear shelf support rail away

from the side wall and remove it.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

The rounded ends of the shelf

supports must point to the front.

10.3 Catalytic walls

The walls with catalytic enamel are self-

cleaning. They absorb fat which collects

on walls when the oven operates.

To support the self-cleaning process:

1. Activate the oven lamp.

2.

Remove the accessories from the ap-

pliance.

3.

Clean the oven floor with warm water

and washing-up liquid, then dry it.

4.

Set the function

and maximum

temperature.

5.

Let the empty appliance operate for

one hour.

6. When the appliance is cool, clean it

with a soft and moist sponge.

WARNING!

Do not clean the catalytic surface

with oven sprays, abrasive clean-

ing agents, soap or other cleaning

agents. There is a risk of damage

to the catalytic surface.

WARNING!

Keep children away when you

clean the oven at a high tempera-

ture. The oven surface becomes

very hot and there is a risk of

burns.

Discolouration of the catalytic sur-

face has no effect on the catalytic

properties.

10.4 Oven ceiling

You can remove the grill to clean the oven

ceiling more easily.

WARNING!

Deactivate the appliance before

you remove the grill. Make sure

that the appliance is cold. There is

a risk of burns.

1.

Remove the screw which holds the

grill. For the first time, use a screw-

driver.

2.

Carefully pull the grill down.

3.

Clean the oven ceiling with a soft

cloth with warm water and a cleaning

agent, and let it dry.

4.

Install the grill in the opposite se-

quence.

WARNING!

Make sure that the grill is correctly

installed and that it does not fall

down.

10.5 Oven lamp

WARNING!

Be careful when you change the

oven lamp. There is a risk of elec-

trical shock.

ENGLISH 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare