Electrolux EHE6002X Bedienungsanleitung PDF herunterladen (Seite 17)

electrolux 17

Supply Cable Specifications

Connection Min. size Cable / Fuse

via Cable / flex

flex type

• Appliance 6 mm

PVC/PVC

30 A

Control twin and

Circuit earth

Ensure that the hob supply cord does not come into contact with surfaces

with temperatures higher than 90 deg. C.

The replacement of electric cable must be carried out exclusively by

the service force centre or by personnel with similar competencies,

in accordance with the current regulations.

6) Secure the cable by means of the clamp screws and refit the terminal

block cover.

Fit the cable with a plug suitable for the load and connect it to a suitable safety

socket.

To connect directly to the mains, a suitable omnipolar switch complying with

current standards and with a contact gap of at least 3 mm must be installed between

the appliance and the electrical system.

The yellow/green earth wire must not be interrupted by the switch. The brown

phase wire (coming from terminal "L" on the terminal block) must always be

connected to the power supply phase.

In any case the power cable must be positioned in such a way that no part of it

reaches a temperature of 50°C higher than the ambient temperature.

The cable is guided by means of clamps fixed to the side of the cabinet, in order

to avoid any contact with the equipment beneath the cooktop.

The Manufacturer declines any liability if the accident-prevention

regulations are not respected.

Electrical connection to the terminal

box

The appliance is fitted with a five pole terminal

box whose cables are predisposed for a 230 V

monophase function (Fig. 3).

The earth wire should be connected to the

terminal marked by the sign .

After having connected the wire to the

terminal secure it with a cable clip.

Fig. 3

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Electrolux EHE6002X Bedienungsanleitung Seite 17