Electrolux EHE6002X Bedienungsanleitung PDF herunterladen (Seite 18)

18 electrolux

Seal

Fitting the Hob into the Worktop

Carry out the building in of the hob as follows:

1) put the seals supplied with the

hob, on the edges of the cut out,

taking care that the seals meet

without overlapping;

2) place the hob in the cut out, taking

care that it is centred;

3) fix the hob with the relevant fixing

clamps and screws, as shown in

the diagram. When the screws

have been tightened, the excess

seal can be removed.

The edge of the hob forms a double

seal which prevents the ingress of liquids.

Installation

The hob must be installed according to the instructions supplied.

The hob must be installed by qualified personnel to the relevant British

Standards.

Please, ensure that, once the hob is installed, it is easily accessible for the

engineer in the event of a breakdown.

When the hob is first installed, it is important to remove any protective

materials, which were put on in the factory.

The manufacturer will not accept liability, should the above instructions or

any of the other safety instructions incorporated in this book be ignored.

These cooktops are designed for fitting on modular kitchen cabinets having a

depth of between 550 and 600 mm and suitable characteristics.

Wiring Diagram

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Electrolux EHE6002X Bedienungsanleitung Seite 18