Electrolux EHT7833K Bedienungsanleitung PDF herunterladen (Seite 41)

electrolux 41

By-pass screw

FO 0392

Injectors replacement

• Remove the pan supports.

• Remove the burner's caps and

crowns.

• With a socket spanner 7 unscrew

and remove the injectors, and replace

them with the ones required for the

type of gas in use.

• Reassemble the parts, following the

same procedure backwards.

• Replace the rating label (placed near

the gas supply pipe) with the relevant

one for the new type of gas supply.

You can find this label in the package

of the injectors supplied with the

appliance.

Should the feeding gas pressure be

different or variable compared with the

required pressure, an appropriate

pressure adjuster must be fitted on the

gas supply pipe, in compliance with the

rules in force.

Adjustment of minimum level

To adjust the minimum level of the

burners, proceed as follows:

• Light the burner.

• Turn the knob on the minimum position.

• Remove the knob.

• With a thin screwdriver, adjust the by-pass screw. If changing from natural

gas to liquid gas, completely tighten clockwise the screw, until a small regular

flame is obtained. If changing from liquid gas to natural gas unscrew about

1/4 turn the by-pass screw, until a small regular flame is obtained.

• Finally check the flame does not go out when quickly turning the knob from

the maximum position to the minimum position.

This procedure can easily be carried out, anyhow the hob has been positioned

or built in the working top.

Adaptation to different types of gas

IMPORTANT - When the final connection has been made, it is

essential that a thorough leak test is carried out on the hob and

installation. Use some soapy water, never a flame.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux EHT7833K Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Electrolux EHT7833K