Electrolux GK653TSIF Bedienungsanleitung PDF herunterladen (Seite 18)

and work surfaces that align to the

standards.

During installation in combustible matter,

NIN SEV 1000 and fire protection

guidelines and regulations of the

Association of Cantonal Fire Insurance

shall be strictly adhered to.

8.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable

use the following (or higher) mains

cable type: H05V2V2-F T min 90°C.

Speak to your local Service Centre.

8.4 Electrical connection

Install the hob with a socket supply line. If

there is no socket supply line, the fixed

home electrical system must include an

isolating device with at least a 3 mm-

contact separation to enable a

simultaneous and all-pole cut off from the

mains (according to NIN SEV 1000).

400

L1

L2

N

PE

L1

N

PE

8.5 Attaching the seal

1. Clean the worktop around the cut out

area.

2. Attach the supplied seal stripe to the

lower edge of the hob along the outer

edge of the glass ceramic. Do not

extend it. Make sure that the ends of

the seal stripe are located in the

middle of one side of the hob.

3. Add some mm when you cut the seal

stripe to the length.

4. Push the two ends of seal stripe

together.

www.electrolux.com18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare