
22 electrolux
Installation Instructions
1 Safety instructions
Warning! This must be read!
The laws, ordinances, directives and stand-
ards in force in the country of use are to be
followed (safety regulations, proper recycling
in accordance with the regulations, etc.)
Installation may only be carried out by a qual-
ified electrician.
The minimum distances to other appliances
and units are to be observed.
Anti-shock protection must be provided by
the installation, for example drawers may
only be installed with a protective floor direct-
ly underneath the appliance.
The cut surfaces of the worktop are to be
protected against moisture using a suitable
sealant.
The sealant seals the appliance to the work
top with no gap.
When building in, protect the underside of
the appliance from steam and moisture, e.g.
from a dishwasher or oven.
Avoid installing the appliance next to doors
and under windows. Otherwise hot cook-
ware may be knocked off the rings when
doors and windows are opened.
z Risk of injury from electrical cur-
rent.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by install-
ing correctly.
• The appliance must be connected to the
electrical supply by a qualified electri-
cian.
z Risk of injury from electrical cur-
rent.
• Loose and inappropriate plug and sock-
et connections can make the terminal
overheat.
• Have the clamping connections correct-
ly installed by a qualified electrician.
• Use strain relief clamp on cable.
• CAUTION: The surface temperature ex-
ceeds 95°C. To avoid a hazard, under-
bench access must be restricted.
• Supply cords must have a temperature
rating not less than 105°C.
• The ventilation gap requirement of 5mm
underneath the cooktop must be ob-
served.
Kommentare zu diesen Handbüchern