Electrolux EKG613A1OX Bedienungsanleitung PDF herunterladen (Seite 24)

14.11 Adjusting the minimum

gas level on the hob burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the hob. If there

is no access to the bypass screw

dismount the control panel before

adjustment start.

3. With a thin and flat screwdriver adjust

the bypass screw A.

The model determines the position of

the bypass screw A.

A

A

Changing from natural gas to

liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

Changing from liquid gas to

natural gas

1. Unscrew approximately one turn the

bypass screw position A.

2. Put the knob for the hob back.

3. Connect the appliance to the

electricity.

WARNING!

Put the mains plug into

the mains socket only if

all parts are back into

their initial position.

There is a risk of injury.

4. Light the burner.

Refer to "Hob - Daily use" chapter.

5. Turn the knob for the hob to the

minimum position.

6. Remove the knob for the hob again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the hob back on.

14.12 Oven injector

replacement

1. Remove the bottom plate of the oven

cavity to get access to the oven

burner .

2. Carefully remove from the burner the

thermocouple A. Next remove the

spark plug B.

A

B

3. Unscrew the screw and slowly pull

out the burner.

1

2

4. Release the burner injector with a 7

mm socket spanner and replace it

with a right one.

www.electrolux.com24

1 2 ... 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare