Electrolux EKK603504X Bedienungsanleitung PDF herunterladen (Seite 24)

24 electrolux

Oven lamp replacement

Disconnect the appliance from the

electricity supply.

If the oven bulb needs replacing, it must

comply with the following specifications:

electric power, 15 W/25 W; electric rate, 230

V (50 Hz); resistant to temperatures of

300°C; connection type: E14. These bulbs

are available from your local Service Force

Centre.

To replace the faulty bulb:

1. Ensure the oven is disconnected from

the electrical supply.

2. Turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace it

with the new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

)

Lid cleaning

The crystal lid can be dissasembled to

allow a better cleaning ( see diagram).

Clean the crystal lid only with warm water

and avoid the use of rough cloths or abrasive

substances. After a proper cleaning, carefully

reposition the lid into its hinges.

Balancing the lid

Appliances provided with crystal lids are

equipped with specially balanced springs,

inserted in the hinges at the back of the

appliance, to allow the lid to be closed

smoothly and easily.

You can use a screwdriver to adjust the

closure of the lid. The necessary force for

opening/closing the lid can be increased by

turning the adjusting screw 2 or 3 times as

shown in the diagram.

Controls - Sundries

Periodically check the condition of the

flexible pipe of gas connection and make it

replaced by skilled technicians as soon as it

shows abnormalities. Annual replacement is

recommended.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare