Electrolux GHL246SW Bedienungsanleitung PDF herunterladen (Seite 12)

Sym‐

bol

Function

150 °

C -

250 °

C

Range of temperature adjust‐

ment.

8.2 Manual ignition of oven gas

burner

Oven safety device:

The gas oven has a

thermocouple. It stops the

gas flow if the flame goes

out.

1. Open the oven door.

2. Hold the flame near the hole in the

bottom of the oven cavity.

3. At the same time push the knob for

the oven functions and turn it

counterclockwise to the maximum

gas flow position. At the same time

push the knob for the gas control and

turn it counterclockwise to the

maximum temperature.

4. When the flame comes on, keep the

knob for the oven functions pushed

on the maximum gas flow position for

15 seconds or less to let the

thermocouple warm up. When the

flame comes on, keep the knob for

the gas control pushed for 15

seconds or less to let the

thermocouple warm up. If not, the

gas flow is interrupted.

Do not keep the knob for the

oven functions pushed for

more than 15 seconds. If the

oven burner does not light

after 15 seconds, release

the knob for the oven

functions, turn it into off

position, open the oven door

and try to light the oven

burner again after minimum

1 minute.

8.3 After igniting the oven gas

burner

1. Release the knob for the oven

functions.

2. Close the oven door.

3. Turn the knob for the oven functions

to set the necessary heat setting.

Control the flame trough the holes in the

bottom of the oven.

9. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

9.1 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

Baking tray:

Push the baking tray between the guide

bars of the shelf support.

www.electrolux.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare