Electrolux GK69TSCN Bedienungsanleitung PDF herunterladen (Seite 10)

Information on acrylamides

Important! According to the newest

scientific knowledge, if you brown food

(specially the one which contains starch),

acrylamides can pose a health risk. Thus,

we recommend that you cook at the lowest

temperatures and do not brown food too

much.

CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the glass-

ceramic cause no effect on how the

appliance operates.

To remove the dirt:

1. – Remove immediately: melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to

the appliance. Use a special scraper

for the glass . Put the scraper on the

glass surface at an acute angle and

move the blade on the surface .

– Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metallic

discolorations. Use a special cleaning

agent for glass ceramic or stainless

steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry

with a clean cloth.

TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate or operate

the appliance.

The appliance is not connec-

ted to an electrical supply or it

is connected incorrectly.

Check if the appliance is cor-

rectly connected to the electrical

supply (refer to connection dia-

gram).

Activate the appliance again and

set the heat setting in less than

10 seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

The STOP+GO function oper-

ates.

Refer to the chapter “Daily Use”.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds and

the appliance deactivates.

An acoustic signal sounds

when the appliance is deacti-

vated.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The appliance deactivates. You put something on the sen-

sor field

.

Remove the object from the

sensor field.

10 electrolux

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare