Electrolux GK69TSHO Bedienungsanleitung PDF herunterladen (Seite 14)

hoods that work with this function must

have the symbol .

6. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special cleaner applicable for the

surface of the hob.

• Use a special scraper for the glass.

6.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar.

If not, the dirt can cause damage to the

hob. Take care to avoid burns. Put the

special scraper on the glass surface at

an acute angle and move the blade on

the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and non-abrasive

detergent. After cleaning, wipe the hob

dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a moist cloth.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor field.

STOP+GO function oper-

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva-

ted.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare