Electrolux EOB53100X Bedienungsanleitung PDF herunterladen (Seite 18)

Installing the heating element

1. Install the heating element in opposite

sequence.

Important! Install the heating element

correctly on the two sides above the

support on the inner wall of the oven.

2. Insert shelf support rails.

Shelf Support Rails

Removing the shelf support rails

1. Pull the front of the shelf support rail

away from the side wall.

2. Pull the rear shelf support rail away

from the side wall and remove it.

2

1

Installing the shelf support rails

Install the shelf support rails in opposite se-

quence.

Important! The rounded ends of the

shelf support rails must point to the

front!

Oven lamp

Warning! There is a danger of

electrical shock!

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or

switch off the circuit breaker.

Put a cloth on the bottom of the oven

for protection of the oven light and

glass cover.

Replacing the oven lamp

1. You can find the lamp glass cover at

the back of the cavity.

Turn the lamp glass cover counter-

clockwise to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with applicable

300°C heat-resistant oven lamp.

Important! Use the same oven lamp type.

4. Install the glass cover.

Oven door and glass panels

To clean the oven door remove it.

Caution! Be careful when you remove

the door from the appliance. The door

is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two

door hinges fully.

A

A

3. Close the oven door until the first posi-

tion (angle approx. 45°).

45°

18 electrolux

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare