Electrolux EON6701X Bedienungsanleitung PDF herunterladen

English

Warnings - Built-under ovens

It is most important that the instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred to another owner, or should you move

house and leave the appliance, always ensure that the book is supplied with the appliance in

order that the new owner can be acquainted with the functioning of the appliance and the

relevant warnings. These warnings are provided in the interest of safety. You must read them

carefully before installing or using the appliance.

Installation

z Any installation work must be undertaken

by a qualified electrician or competent

person.

z Installation and initial adjustment of your

oven MUST be carried out by qualified

personnel in compliance with current

regulations. Specific installation

instructions for the installer are given in this

booklet.

During use

z This appliance has been designed for

cooking edible foodstuffs only, and must

not be used for any other purposes.

z Always stand back from the oven when

opening the oven door during cooking or

at the end of it to allow any build up of

steam or heat to release.

z It is dangerous to alter the specifications

or modify the product in any way.

z Appliances become very hot with use, and

retain their heat for a long period after use.

Care should be taken to avoid touching

heating elements inside the oven.

z Always ensure that the control knobs are

in the “off” position when not in use.

z For hygiene and safety reasons, this

appliance should be kept clean at all times.

A build-up of fats or foodstuffs could result

in a fire.

z Never line any part of the oven with

aluminium foil.

z Easy clean-liners (if provided) should never

be cleaned with any other than soapy water.

z Never use steam or steam machines to

clean the appliance.

z Before any maintenance or cleaning work

is carried out on the appliance, always turn

off the isolator switch at the cooker point,

and allow to cool.

z Ensure that the shelves are put in place in

the correct way.

z This oven (even if it is linked to an electrical

cooking table) is made to function at 230 V

mono, double or three-phase with neutral.

z A polyphase linking without neutral (400 V)

can induce the distruction of the oven and

of the eventual cooking table.

Child safety

z This appliance is designed to be operated

by adults. Children should not be allowed

to tamper with the controls or play with the

product.

z Children should be supervised at all times

and should not be allowed to touch the hot

surfaces or be in the vicinity when in use or

until the appliance has cooled after use.

z During oven cooking and grilling, the

appliance door and the surrounding parts

are warmed up to a very high temperature.

Be careful and keep children away from

the appliance while you are using it. When

you connect other appliances to a plug near

the oven, check carefully that the wire does

not touch warm parts of the oven and does

not get taken in the oven door.

1 2 3 4 5 6 ... 20 21

Inhaltsverzeichnis

Seite 1 - Child safety

24English Warnings - Built-under ovensIt is most important that the instruction book should be retained with the appliance for futurereference. Shoul

Seite 2 - Technical assistance

33Hints and tips for using the ovenAlways cook with the oven doorclosed.The oven is supplied with an exclusivesystem which produces a naturalcirculati

Seite 3 - Description of the appliance

34 Some hintsFor baking cakesCakes require a moderate temperature(normally between 150 and 200°C). Inaddition, the oven must be heated upbeforehand -

Seite 4 - Electric oven

3543214321CAKESWhipped up kneading2 170 2 (1 and 3)* 160 45 ~ 60 In cake mouldShortbread dough2 170 2 (1 and 3)* 160 20 ~ 30 In cake mouldButter-milk

Seite 5

36Fillet steaks4 800 3 max 12 ~ 15 12 ~ 14Beef-steaks 4 600 3 max 10 ~ 12 6 ~ 8Sausages 8 — 3 max 12 ~ 15 10 ~ 12Pork chops 4 600 3 max 12 ~ 16 12 ~ 1

Seite 6 - Electronic programmer

37Fig. 5FO 0452Oven door cleaningFor a better cleansing of the oven door, youare suggested to remove it from the appliancewith the following procedure

Seite 7 - “End of cooking” function

38Fig. 6Replacing the oven lightDisconnect the appliance from its powersupply point. Push in and unscrew the glasscap (Fig. 6). Unscrew the light bulb

Seite 8 - “Minute minder” function

39If the appliance is not working correctly, please carry out the following checks, beforecontacting your local Service Centre.What happens if somethi

Seite 9 - How to switch off the

40Technical DataThis appliance complies with thefollowing E.E.C. Directives:- 73/23 - 90/683 (Low Voltage Directive);- 89/336 (Electromagnetical Compa

Seite 10 - Thermal grilling

41Instructions for the installerThe instructions given below aredesigned specifically for a qualifiedinstaller and should aid him or her toperform all

Seite 11 - Cooking times

42Electrical connection withthe hobThis oven can be connected to hobsindicated in the paragraph "Technical data".The oven socket "A&quo

Seite 12 - Cooking Tables

25Guide to Use theinstructionsSafety InstructionsStep by step instructions for anoperationHints and Tips)MANUFACTURER:ELECTROLUX HOME PRODUCTS ITALY

Seite 13 - Grilling

43To ensure correct operation of the built-inassembly, the kitchen cabinet and therecess for the built-in appliance must havesuitable dimensions. When

Seite 14 - Cleaning and Maintenance

35686-8103 09/04Grafiche MDM - Forlì From the Electrolux Group. The world’s No.1 choice.The Electrolux Group is the world’s larges

Seite 15 - The Hinged Grill

26Description of the appliance1. Control Panel2. Front right hotplate/cooking zone controlknob3. Rear right hotplate/cooking zone controlknob4. Rear l

Seite 16 - Service and Spare Parts

27Electric ovenOven Function (Fig. 1) andThermostat (Fig. 2) controlknobsThey enable to select the most appropriatetype of heating for the different

Seite 17 - Technical Data

28Hotplate control knobsThe Control Knobs for the hotplates (Fig. 3)can be found on the oven control panel. Theenergy regulator of the hotplates can b

Seite 18 - Connecting the terminal board

29Electronic programmer451236781. Push button for selecting a function 2. Decreasing control button “ ”3. Increasing control button “ ”4. Display5. “

Seite 19 - Electrical connection with

30lamp will start flashing. Then, proceed as follows:To set the duration time:1. press button “ ” or “ ”.2. After the setting is carried out, wait

Seite 20 - Building-in under a kitchen

31To cancel the End of cooking time:1. Press button repeatedly to select the “End of cooking”function. The relevant pilot lamp will flash and th

Seite 21 - Grafiche MDM - Forlì

32How to switch off thedisplay1. Press two or three programmer pushbuttons simoultaneously and keep thempressed for about 5 seconds. The displaywill