
ENGLISH 8
6. DAILY USE
WARNING!
Refer to the chapters on safety
Switch the appliance on using the
ON/OFF -1- switch and wait until the
display shows the last program
performed (e.g. P1).
Lift the cover and place the pouch
containing the food to be packed
inside the tank, leaving at least 2 cm
beyond the sealing bar (see figure)
For small products, use the supplied filler
plate, as it helps position the pouch in
the correct position with respect to the
sealing bar.
Close the cover and select the
required program pressing
DECREASE/ INCREASE -9-, -10- and
then press Start -8-.
During the vacuum stage, the display
shows the progress (in percentage)
until the set value is reached.
The display now shows the sealing time,
after which the environmental pressure is
restored inside the tank.
Now you can open the cover, as soon
as the display shows the program
number (e.g. P1).
Programs from P1 to P5 can be set
according to the consumer's
requirements.
By default, the set vacuum is 99.9%
and the recommended sealing time for
the supplied pouches is 2 seconds.
These parameters are suitable for the
normal use of the machine.
Refer to the following table for other
settings.
Recommended vacuum % table
“Value for food preservation purpose”
Kommentare zu diesen Handbüchern