Electrolux EVY8840AOX Bedienungsanleitung PDF herunterladen (Seite 11)

• Residual heat:

– When the heating function or pro-

gramme operates, the heating ele-

ments are deactivated 10% earlier

(the lamp and fan continue to oper-

ate). For this feature to operate, the

cooking time must be longer than 30

minutes or you must use the clock

functions ( Duration , End Time ).

– When the appliance is off, you can

use the heat to keep food warm. The

display shows the remaining temper-

ature.

• Cooking with the lamp off - Touch

and hold

for 3 seconds to deactivate

the lamp during cooking.

7. CLOCK FUNCTIONS

7.1 Clock functions

Symbol Function Description

Minute Minder

To set a countdown (maximum: 2 hours, 30 mi-

nutes). This function has no effect on the operation

of the appliance. Touch

to activate the function.

Touch

or to set the minutes and OK to start.

Duration

To set the length of an operation (maximum: 23

hours, 59 minutes).

End Time

To set the switch-off time for a heating function

(maximum: 23 hours, 59 minutes).

If you set the time for a clock function, the

time starts to count down after 5 sec-

onds.

If you use the clock functions Du-

ration and End Time , the appli-

ance deactivates the heating ele-

ments after 90% of the set time.

The appliance uses the residual

heat to continue the cooking pro-

cedure until the time ends. The re-

sidual heat can last from 3 to 20

minutes.

Setting the clock functions:

1.

Set a heating function.

2.

Touch again and again until the

display shows the necessary clock

function and the related symbol.

3.

Touch or to set the necessary

time. Touch OK to confirm.

When the time ends, an acoustic sig-

nal sounds. The appliance deacti-

vates. The display shows a message.

4.

Touch a sensor field to stop the sig-

nal.

Useful information:

• With Duration and End Time , the appli-

ance deactivates automatically.

• With Duration and End Time , you must

set the heating function and the tem-

perature first. Then you can set the

clock function.

• You can use Duration and End Time at

the same time if you want to automati-

cally activate and deactivate the appli-

ance at a given time later.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare