Electrolux EWX14550W Bedienungsanleitung PDF herunterladen (Seite 26)

Accurate levelling prevents vibration, noise

and displacement of the machine during op-

eration.

Caution! Never place cardboard, wood

or similar materials under the machine to

compensate for any unevenness in the

floor. After having levelled the appliance,

tighten the lock nuts.

Water inlet

An inlet hose is supplied and can been found

inside the machine drum. Do not use the

hose from your previous machine to connect

to the water supply.

Important! This appliance must be con-

nected to a cold water supply.

1. Open the porthole and extract the inlet

hose.

2. Connect the hose with the angled con-

nection to the machine. Do not place the

inlet hose downwards. Angle the hose to

the left or right depending on the position

of your water tap.

3. Set the hose correctly by loosening the

ring nut. After positioning the inlet hose,

be sure to tighten the ring nut again to

prevent leaks.

4. Connect the hose to a tap with a 3/4”

thread. Always use the hose supplied

with the appliance.

The inlet hose must not be lengthened. If it is

too short and you do not wish to move the

tap, you will have to purchase a new, longer

hose specially designed for this type of use.

Water-stop device

The inlet hose is provided with a water stop

device, which protects against damage

caused by water leaks in the hose which

could develop due to natural ageing of the

hose. This fault is shown by a red sector in

the window «A» . Should this occur, turn the

water tap off and refer to your Service Centre

to replace the hose.

45°

35°

26 electrolux

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare