Electrolux EWX14550W Bedienungsanleitung PDF herunterladen (Seite 9)

Select the required programme by

turning the programme selector dial (1)

Turn the programme selector dial to the re-

quired programme. The washing machine

will propose a temperature and automatically

select the maximum spin value provided for

the programme you have chosen. You can

change these values by operating the corre-

sponding buttons. The green pilot light of the

button 8 starts to flash.

The selector dial can be turned either clock-

wise or counterclockwise. Turn to position

« O » to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-

tor dial must be turned to position O, to

switch the machine off.

Caution! If you turn the programme

selector dial to another programme

when the machine is working, the red

pilot light of button 8 will blink 3 times

and the message Err is displayed to

indicate a wrong selection. The machine

will not perform the new selected

programme.

Select the temperature by pressing

button 2

By selecting a programme, the appliance

proposes automatically a default tempera-

ture.

Press this button repeatedly to increase or

decrease the temperature, if you want your

laundry to be washed at a different temper-

ature.

Reduce the spin speed by pressing

button 3

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 3 repeatedly to change the spin

speed, if you want your laundry to be spun at

a different speed. The relevant light illumi-

nates.

Select the available option by pressing

buttons 3, 4 and 5

Depending on the selected programme, dif-

ferent functions can be combined before

pressing the button 8 . By selecting an option

the relevant pilot light illuminates.

If an incorrect option is selected, the integra-

ted red pilot light of the button 8 flashes 3

times and the Err message appears on the

display for few seconds.

For compatibility among the washing

programmes and the options see chap-

ter «Washing Programmes».

Select the Delay Start by pressing

button 6

Before you start the programme, if you wish

to delay the start, press the button 6 repeat-

edly, to select the desired delay. The relevant

pilot light goes on.

The selected delay time value (up to 20

hours) will appear on the display a few sec-

onds, then the duration of the programme

will appear again.

You must select this option after you have set

the programme and before you press button

8 .

You can cancel or modify the delay time at

any moment, before you press button 8 .

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the but-

ton 6 .

3.

Press button 8 :

– the machine starts its hourly count-

down.

– The programme will start after the se-

lected delay has expired.

Cancelling the delayed start after having

pressed button 8 :

1. Set the washing machine to PAUSE by

pressing button 8 .

2.

Press button 6 once until the symbol 0’ is

displayed

3.

Press button 8 again to start the pro-

gramme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The Delay Start can not be selected with

DRAIN programme.

Start the programme by pressing button

8

To start the selected programme, press the

button 8 , the green pilot light of the button

8 stops blinking.

To interrupt a programme which is running,

press the button 8 : the green pilot light starts

blinking.

electrolux 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare