Electrolux EFP6411X Bedienungsanleitung PDF herunterladen (Seite 43)

Mounting accessories included

1 allen spanner (for TORX screws).

4 screws 4,5 x 16

6 screws 4 x 8

4 Brackets

1 Flange

Montage

 Fix the 2 brackets D (Fig. 7) to the side panel

of the wall cabinet (one per side) with 2 screws

for each bracket (align the bracket to lower

border).

Position the bracket to touch the back border of

the wall cabinet, considering that the back

border of the bracket corresponds to the back

side of the cooker hood;

Drill a hole on the ceiling of the wall cabinet to

pass the discharge tube and the electrical cable.

 Fix 2 brackets E (Fig. 8) to the sides of the

cooker hood (one per side).

a. remove the extractable part of the cooker

hood;

b. remove the grease filter/s;

c. fix the brackets with two screws P per

bracket from inside the cooker hood, affix them

as more as possible upwards (air exit side) and

then serrate the screws.

 Insert the cooker hood in the wall cabinet,

ensuring to position the cooker hood bracket E

above the wall cabinet bracket D (Fig. 9).

Thread the electric cable through the

appropriate perforation.

 Block the cooker hood with two screws on the

frontal part (Fig. 9  one per side).

 Connect the cable to the electrical mains, only

when the installation is completed.

 If the cooker hood should not touch perfectly

with the lower border of the wall cabinet then

regulate by loosening the screws P of the

brackets E mounted on the cooker hood (Fig.

8), it will be possible to regulate the perfect

matching of the cooker hood and wall cabinet,

once regulated tighten the screws.

 Regulate the gliding of the extractable drawer in

4 x 8

Ø 150mm

min.

135

Ø 4,5x16

P - Ø

4 x 8

Fig. 7

Fig. 8

Fig. 9

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux EFP6411X Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Dunstabzugshauben Electrolux EFP6411X