Electrolux EOA5651BOX Bedienungsanleitung PDF herunterladen (Seite 26)

Installing the door and the glass panel

When the cleaning is completed, install

the glass panels and the oven door. Do

the above steps in the opposite se-

quence.

Make sure that you put the glass panels

back in the correct sequence. The second

panel has a decorative frame. The screen-

printing zone must face the inner side of

the door. Make sure that after the installa-

tion the surface of the glass panel frame

on the screen-printing zones is not rough

when you touch it.

Make sure that you install the middle pan-

el of glass in the seats correctly (refer to

the illustration).

11. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

Problem Possible cause Remedy

The oven does not heat

up.

The appliance is deacti-

vated.

Activate the appliance.

The oven does not heat

up.

The clock is not set. Set the clock. Refer to

"Setting the time of day".

The oven does not heat

up.

The necessary settings

are not set.

Make sure that the set-

tings are correct.

The oven does not heat

up.

The automatic switch-off

is on.

Refer to "Automatic

switch-off".

The oven does not heat

up.

The Child Lock is on. Refer to "Deactivating the

Child Lock".

The oven does not heat

up.

The fuse in the fuse box

is released.

Do a check of the fuse. If

the fuse is released more

than one time, contact a

qualified electrician.

The oven lamp does not

operate.

The oven lamp is defec-

tive.

Replace the oven lamp.

The core temperature

sensor does not operate.

The plug of the core tem-

perature sensor is not

correctly installed into the

socket.

Put the plug of the core

temperature sensor as far

as possible into the sock-

et.

26

www.electrolux.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare